Two Way Radio Solutions – Chierda Walkie Talkie Manufacturer

Chierda S890 40W SSB 28-29.700 MHz 10 Meters Ham Radio

1. Frequency Band: 28.000-29.700 MHz(24.500-30.105MHz)

2. RF Output Power: AM: 12W  FM/SSB/CW: 40W

3. Beep Voice Prompt

4. Dual LCD Display

5. Scan Function

6. Power Supplied Voltage Protection

7. DW Dual Watch Function

8. Keyboard Lock Function

9. AI-based Noise Reduction(Optional)

10. VOX Function(Optional)

Product Overview

Features

The Chierda S890 is a multimode mobile transceiver built for the 10 meter band. Its standard coverage runs from 28.000 to 29.700 MHz, and the full tuning range spans 24.500 to 30.105 MHz across bands A, B, C, D, E, F, G, H and J. Each band holds 40 programmable channels. RF output reaches 40W on FM, SSB and CW, with 12W on AM, and the radio runs from a 13.8V vehicle electrical system.

The set ships with a hand microphone, mounting bracket and power cable, so it installs in a car or truck as delivered. For B2B buyers, the S890 fits product lines aimed at long-distance drivers, off-road users and licensed 10 meter amateur operators.

Key Features

40W Multimode Transmission

The radio delivers 40W on FM, SSB and CW and 12W on AM. Three output settings are listed: Low 4W, Middle 8W and High 40W, giving installers room to match transmit power to the installation and local regulations.

Six Operating Modes

Modes include AM and FM voice, USB and LSB sideband, CW and PA. This mode set covers everyday voice contacts on the 10 meter band and gives operators access to sideband and carrier wave work.

Multi-Band Coverage with 40 Programmable Channels per Band

Tuning covers 24.500 to 30.105 MHz over nine bands, lettered A, B, C, D, E, F, G, H and J. Each band stores 40 programmable channels, and frequency steps from 10 Hz to 10 kHz support fine tuning.

Dual LCD Display

The S890 carries two LCD screens. The panel screen offers four selectable background colors, so the operator can adjust the display for different lighting conditions on day and night drives.

Noise Blanker, ANL and Mic Gain Adjustment

A built-in noise blanker, a switchable ANL circuit and mic gain adjustment are designed to control ignition and background noise in vehicle installations. The receiver adds 45dB of adjustable RF gain and an AGC circuit, which keep received audio workable as signal levels change.

DW Dual Watch and Scan Function

Dual Watch (DW) monitors a second channel while the radio stays on the working channel. The scan function sweeps programmed channels for activity, which helps operators find traffic on a busy band.

Power Supply Voltage Protection and Keyboard Lock

The radio protects itself against abnormal supply voltage, with the specification listing 11.7V minimum and 15.9V maximum input. A keyboard lock prevents accidental key presses during driving.

VOX and AI Noise Reduction (Optional)

VOX supports voice-activated hands-free transmission, and AI-based noise reduction is offered as an option. Both functions are marked optional in the manufacturer’s feature list and depend on the ordered configuration.

Functions and Performance

On receive, the S890 combines a noise blanker effective on AM, FM and SSB with switchable ANL, an adjustable squelch threshold below 0.5μV, 45dB of adjustable RF gain and AGC action that holds audio output changes under 10dB across wide input swings. Audio output is 3W into an 8 Ohm speaker, with an 8 Ohm external speaker jack that mutes the internal speaker when used.

On transmit, SSB carrier suppression is rated at 55dB and unwanted sideband at 50dB. Intermodulation distortion figures are listed as better than -25dB at 3rd order and better than -35dB at 5th order, and the transmitter frequency response for AM and FM spans 450 to 2500 Hz. The antenna connects through a UHF SO239 socket.

 

whats in the Box

What Is in the Box

  • S890 radio x 1
  • Hand microphone x 1
  • Mounting bracket x 1
  • Screw pack x 1
  • Power cable x 1
  • User’s manual x 1

The programming cable is not included.

Applications

Long-Haul and Highway Driving

The S890 keeps drivers connected on the road, and the dual LCD with adjustable background color stays readable between day and night conditions. Voltage protection suits the rough electrical environment of trucks and older vehicles.

Off-Road Use

The noise blanker, ANL and mic gain adjustment target the impulse noise typical of vehicle installations, which supports dependable communication off the pavement.

10 Meter Amateur Operation

The 28.000 to 29.700 MHz range matches the 10 meter amateur band. Operation on amateur frequencies requires the license applicable in the user’s country. The manufacturer lists the S890 as CE certified.

 

Features
Features

 

Technical Specifications

General

  • Frequency: 28.000 to 29.700 MHz (24.500 to 30.105 MHz full tuning range)
  • Frequency bands: A, B, C, D, E, F, G, H, J
  • Channels: 40 channels (programmable) in each band
  • Frequency control: phase-locked loop (PLL) synthesizer
  • Frequency step: 10 Hz / 100 Hz / 1 kHz / 10 kHz
  • Frequency tolerance: 0.005%
  • Frequency stability: 0.001%
  • Operating temperature: -30°C to +50°C
  • Input voltage: 13.8V normal, 15.9V maximum, 11.7V minimum
  • Current drain: 5A TX AM full modulation, 9A SSB 30W PEP, 0.6A RX squelched
  • Size: 17.5 x 18.2 x 5.3 cm
  • Weight: 1.5 kg
  • Antenna connector: UHF SO239
  • Microphone: plug-in dynamic microphone with PTT and UP/DN switches and coiled cord

Transmitter

  • RF output power: AM 12W, FM/SSB/CW 40W
  • Output levels: Low 4W, Middle 8W, High 40W
  • Modulation: high and low level Class B; AM amplitude modulation, FM frequency modulation
  • Intermodulation distortion: SSB 3rd order better than -25dB, 5th order better than -35dB
  • SSB carrier suppression: 55dB
  • Unwanted sideband: 50dB
  • Frequency response: 450 to 2500 Hz (AM and FM)
  • Impedance: 50 Ohm, unbalanced

Receiver

  • Sensitivity (12dB SINAD), each at more than 1/2W audio output:
    • SSB: 0.25μV for 10dB (S+N)/N
    • AM: 1.0μV for 10dB (S+N)/N
    • FM: 1.0μV for 20dB (S+N)/N
  • Selectivity: AM/FM 6dB at 3 kHz, 50dB at 9 kHz; SSB 6dB at 2.1 kHz, 60dB at 3.3 kHz
  • IF frequency: AM/FM 10.695 MHz 1st IF, 455 kHz 2nd IF; SSB 10.695 MHz
  • Adjacent channel rejection: 60dB AM/FM, 70dB SSB
  • RF gain control: 45dB, adjustable
  • AGC: less than 10dB change in audio output for inputs from 10 to 100,00 μV
  • Squelch: adjustable threshold, less than 0.5μV
  • Automatic squelch control (AM/FM only): 0.5μV
  • ANL: switchable
  • Noise blanker: RF type, effective on AM, FM and SSB
  • Audio output power: 3W into 8 Ohm
  • Audio frequency response: 300 to 2800 Hz
  • Built-in speaker: 8 Ohm, round
  • External speaker: 8 Ohm, mutes the internal speaker when connected (not supplied)

Optional Functions

  • AI-based noise reduction (Optional)
  • VOX (Optional)

Company Profile

Founded in 1988, CHIERDA specializes in the R&D andmanufacturing of professional wireless communicationproducts, including two-way radios, mobile radios, andrepeaters. As a National High-Tech Enterprise, we arecommitted to “Quality First” and “Driven by Innovation.”
With ISO 9001 certification and SEDEX compliance, CHIERDA products meet CE, FCC, IC, RoHS, and other international requirements. Today, we serve customers in over 100 countries and regions, providing reliable wireless communication solutions for diverse markets and industries.

SINCE
1988
99%+
ON-TIME DELIVERY
20,000 m²
MANUFACTURING BASE
300+
EMPLOYEES
50+
TESTING INSTRUMENTS
100+
GLOBAL MARKETS

FAQs

Do you support OEM/ODM services?

Yes! We are a manufacturer offering OEM and ODM services. We can design and customize products according to your specific requirements.

What is your MOQ?

For sample testing, we recommend starting with an order of 2 pieces. Please contact us for more information about bulk order requirements.

Can you offer free samples for testing?

Generally, customers need to pay the sample fee in advance. However, once your order reaches the required quantity, we will refund the sample fee.

Can I place a sample order to test product quality?

Absolutely! You are welcome to place a sample order to evaluate our product quality before making a bulk purchase.

Can I get a better price for large orders?

Yes! We offer more competitive pricing for bulk orders. Generally, the larger your order quantity, the better the price.

How long does it take to ship my order after payment?

Our typical order processing and dispatch times are:

Sample orders: 1–3 days
Bulk orders: 5–8 days
Custom production: 15–30 days

When can I track my shipment online?

We usually provide the tracking number within 2 days. Once you receive it, you can check your shipment status and updates online.

What payment methods do you accept?

We generally accept bank transfers, Western Union, MoneyGram, Trade Assurance, and other payment methods. If you prefer a different payment option, please contact us. We will do our best to accommodate your needs.

How do you ensure product quality?

We use an MES production management system to track the manufacturing process of every product. All products undergo 5 inspections before shipment, and our First Pass Yield (FPY) exceeds 99.4%.

What is your warranty policy?

Radios: 12-month warranty
Accessories: 6-month warranty

We also provide remote technical support. Please contact us if you have any questions or need assistance.

contact banner3
Shoot Us An Email
Shoot Us An Email