X2UV DTMF 5W Dual Band VHF UHF Ham Radio

Features:

• 5W Analog Radio, 128 Channels
• VHF and UHF Dual Band
• Keyboard Operation, LCD Display
• DTMF Function, VOX Hands-free Function
• Emergency Alert
• PTT ID

Standard Package:

• Radio*1
• Battery*1
• Charger*1
• Antenna*1
• Belt Clip*1
• Hand Strap*1
• Users’ Manual*1

 

VOX

When you use the VOX function,the fearures allow you sending out the voice via speaking volum,free your hand from PTT,

Dual band Dual Standby

You can use both UHF and VHF, radio can show them and receive frequency set by A or B channel

Scramble

Encryption way to help your voice no interference,to prevent the outside world who have the same frequency no monitoring your voice

PTT ID

PTT ID is for identify,each walkie talkie can set its own ID code. When the walkie talkie is transmitted, the receiver will receive and display the ID code, thus knowing which walkie talkie is transmitting

DTMF Function

DRMF function can be identify function.DTMF signaling can be used to select the corresponding walkie talkie. It has the very strong anti-interference ability

Radio Remote Stun/Remote Kill

The radio remote stun function can turn off the launch function of the walkie talkie by remote control.

The remote kill function can neither receive nor transmit the walkie talkie by remote control.

Scan Function

By pressing the special key, the radio receives the signals in the channel one by one in a certain order for a period of time

Busy Channel Lockout

It can prevent the walkie talkie to the channel is talking signals, to avoid the other side to hear, it can bring a more smooth call effect

Radio Different Backlights selection

You can choose the backlight you like, it has 3 colors for choose.

Time-out timer

This function is used to limit the user’s time-out transmission on one channel, and also to prevent the walkie talkie from being damaged due to long-time transmission.

Alarm mode

When you are in the emergency ,you can use this function,CD-X2UV has 3 alarm modes:sending alarm tone、sending alarm code and on-site alarm.

Single Call / Group Call / All Call

The radio can set the different call ID, only in same group can communication, different groups can’t work together. Groups don’t disturb each other.

Firmware Update online

You can update the walkie talkie online by the software,it is very convenient.

Technical Data:

SPECIFICATION		TRANSMITTER		RECEIVER
Frequency Range	VHF:136-174MHz &  UHF:400-480MHz	Output Power	5W	RF Sensitivity	≤ 0.25uV/ ≤ 0.3uV
Channel Spacing	128	Current	≤1.3A	Silent Sensitivity	≤0.2uV/≤0.25uV
Memory Channel	12.5 KHz / 25 KHz	Modulation Distortion	<5%(300-3000Hz)	Audio Frequency Power	≥300mW
Rated Voltage	7.4V DC	Maximum Frequency Deviation	≤ 5KHz/≤ 2.5KHz	Audio Distortion	≤5%
Battery Capacity	1200mAh	CTCSS Frequency Deviation	0.75KHz± 50Hz	Modulation Receiver Bandwidth	±7KHz
Frequency Sensitivity	± 2.5ppm	Remanent Radiation	≤7uW	Spurious Rejection	≥55dB
Antenna Impedance	50Ω	Modulation Mode	FM	Selectivity	≥65dB
Dimension	116x54x35mm (Without Antenna)	Remanent Modulation	≤-35dB	Intermodulation	≥60dB